Valves
Cryo Valves
Kits
Speakers
Pedals
Amp Parts
Cabinets
AccessoriesProducts > Cryo Valves > Tesla Cryo
DEEP CYROGENTIC TREATMENT The process involves taking the vacuum tubes and freezing them down to -312 f and soaking these for a minimum of 12 hours. Then the temp is held at this low level for 24 hours. The vacuum tubes are then slowly brought up to normal levels over the next 12 hours. Metals respond very well to deep cryogenic process. The reasons are as follows. During the cooling or solidification phase of the manufacturing process, molecules are trapped in a haphazard pattern. This is down to stress caused in the bending and welding of the anode plate material.. This random placement causes obstacles for electrons and when encountered this interference can cause noise, slow down electron flow and sound deteriation affecting the quality of the sound of the vacuum tube. At very cold temperatures (below -312°F), the molecules will align in a more uniform, compact structure through the removal of kinetic energy. When the material is returned to ambient temperature, this new uniform, compact pattern is maintained, Thus changing the structure of the nickel permanently. This process makes a permanent change and the benefits do not deteriorate over time or upon return to operating temperature, it changes the whole way the vacuum tube performs. The biggest benefits I have found has been a dramatic improvement in dymanic range. Bass response has been clearer with reduction in microphonics. The really most starling fact as been how the valve operates under saturated and overdriven conditions. This has made some of the more basic Fender amps sound fuller and warmer.
Tesla started production in 1922 under its original name of Radioslavia Ltd in Czechoslovakia. It has a long history of manufacturing high quality transmitting valves and defence equipment. The Tesla factory was known for making some outstanding valves. The Original EL34 better in terms of microphonics and reliability than the famous Mullard EL34, hence Marshall used the Tesla EL34 from the mid 1970’s onwards. The frame grid E83CC was due to its construction the most expensive of it type to produce. Still to this day it is one of the best sounding ECC83/12AX7 types ever made. These are just a few of an endless list of pioneering valves produced by this great Czechoslovakian factory that sadly is no longer with us. We have taken some of this factories best sounding valves and cryogenically treated them; the result is performance that is not matched by modern day valves.
All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by all EU countries.
