Fender Pre Amp Kits / Fender Hot Rod Deluxe Medium Gain 15 Harma 5751 HG-STR Pre Amp Revalve Kit
BACK
All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by the UK only.
The Fender Hot Rod Deluxe Harma medium gain 15 Harma 5751 HG kit is designed to give you the perfect balance of a slight reduction in gain to provide a little more clarity in your sound without drastically changing your overdriven sound. It will give you more bite to your overdriven sound when compared to an original American 5751.
The Harma 5751- STR High Gain is a 5751 valve with a higher gain and amplification factor when compared to an original USA made 5751.
This valve has been specially selected to offer around 15% less gain than a typical 12AX7. This is in direct response to the guitarist who wants to slightly reduce the distortion and gain level of his amplifier.
By using this set you will achieve a very transparent and clear treble with a nice open chime when compared to regular ECC83 12AX7 but with the added bonus of more gain than a regular American 5751. So it will not sacrifice the overdriven sound when your amp is cranked.
The 5751-STR HG has all features of the Harma ECC83-STR as it provides the most neutral and clear sound. The valve is very well balanced with nice even bass which has plenty of depth. The mid-range is very transparent and the treble has nice open chime. So this is an ideal choice for your amplifier
If you want a little less gain when compared to an ECC83 12AX7 but more gain than a 5751 then this is the ideal choice.
The kit consists of 3 valves
1 Specially Selected Harma 5751 STR High Gain for position V1
1 Specially Selected Harma ECC83 STR for V2
1 Specially Selected & Balanced Harma ECC83 STR for V3
The Harma valves are specially selected for this kit using very tight gain parameters and
gain selection of the triode sections. The valves are carefully selected for low noise and low levels of hiss and ambient noise with a signal to noise ratio better than -80dBV.
All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by the UK only.
These Pre amp revalve kits use specially chosen valves to help you attain the sound that you are looking for from your amplifier. The valves have been specially chosen for their sound characteristic. They are specially position matched as to their function in your amplifier. They are selected for gain, triode balance, low noise and microphonics. These kits are backed by over 25 years of experience in selecting pre amp valves for professional musicians who trust their sound to Watford valves.
Gain reduction 15%The Fender Hot Rod Deluxe Harma medium gain 15 Harma 5751 HG kit is designed to give you the perfect balance of a slight reduction in gain to provide a little more clarity in your sound without drastically changing your overdriven sound. It will give you more bite to your overdriven sound when compared to an original American 5751.
The Harma 5751- STR High Gain is a 5751 valve with a higher gain and amplification factor when compared to an original USA made 5751.
This valve has been specially selected to offer around 15% less gain than a typical 12AX7. This is in direct response to the guitarist who wants to slightly reduce the distortion and gain level of his amplifier.
By using this set you will achieve a very transparent and clear treble with a nice open chime when compared to regular ECC83 12AX7 but with the added bonus of more gain than a regular American 5751. So it will not sacrifice the overdriven sound when your amp is cranked.
The 5751-STR HG has all features of the Harma ECC83-STR as it provides the most neutral and clear sound. The valve is very well balanced with nice even bass which has plenty of depth. The mid-range is very transparent and the treble has nice open chime. So this is an ideal choice for your amplifier
If you want a little less gain when compared to an ECC83 12AX7 but more gain than a 5751 then this is the ideal choice.
The kit consists of 3 valves
1 Specially Selected Harma 5751 STR High Gain for position V1
1 Specially Selected Harma ECC83 STR for V2
1 Specially Selected & Balanced Harma ECC83 STR for V3
The Harma valves are specially selected for this kit using very tight gain parameters and
gain selection of the triode sections. The valves are carefully selected for low noise and low levels of hiss and ambient noise with a signal to noise ratio better than -80dBV.
Comments
Specials
-
Celestion BN15 400S Neo 8 Ohm
Special Offer 35%
Weight just 2.6 kilos or 5.7 lb
Celestion Neodymium BN15 400S Orange label is a 15 inch ...
£154.17£100.21 -
Celestion BL12 200X Ferrite 4 Ohm
Special Offer 20%
The Ferrite magnet 12 Inch BL12 200X Green label bass speaker gives 200 watts power handling ...
£70.83£56.66 -
Fender Amp Glides Feet-4 Pack
Special Offer 20% Discount
Last few Sets
Fender amp glides feet are made with a chrome cap with rubber ...
£8.00£6.40 -
EL34M-GROOVE TUBES SUPER PREMIUM Trade 12 pieces
Special Offer
The Groove Tubes EL34M Mullard reissue was instigated by Aspen Pittman with Groove Tubes following ...
£432.00£360.00 - ECC83/ECC83S-JJ TESL£
320.00£270.00 - EL34/EL34B-MARSHALL £
576.00£336.00 - ECC83/ECC83S-JJ TESL£
640.00£472.00
Tweet