Voodoo Labs Power Supplies / Voodoo Lab Pedal Power 2 Plus Power Supply

Voodoo Lab Pedal Power 2 Plus Power Supply Click on image(s) above to view larger

All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by the UK only.

Voodoo Lab has designed and manufactured professional electronics for recording and touring musicians since 1986. Rugged, reliable and handmade from the finest components, every product is hand built one at a time in our Northern California facility. Whether you're a stompbox junkie, or putting together the ultimate programmable rig that incorporates rack gear and vintage pedals. Voodoo Lab power supplies are used by Andy summers, The Edge,Kenny Wayne Shepherd and are considered by many professional musicians as the best money can buy.
The Voodoo Lab Pedal Power 2 plus Power Supply is the market leading pedal board supply that is used by countless professional musicians the world over.

The Pedal Power 2 Plus has 4 regulated 9v outputs, it has 2 "line 6" type higher voltage outputs, and it has two more 9v outputs with variable "SAG" control. This means you can take your Favourite Keeley Tubescreamer or any other quality overdrive pedal and vary the voltage going into the pedal.
So you can change to tone of the pedal to replicate the sound of a draining battery enabling you to get exactly the tone that you want.


9/12V (x4) – Standard 9V and 12V Boss ACA
With each one of these four outputs delivering 100mA, you can easily power any 9V battery-operated pedals. Boss pedals that specify the PSA adapter operate at 9V like most other pedals. Boss pedals that require the ACA adapter operate at 12V which can be selected via switches underneath the Pedal Power 2 Plus. Any one of these outputs can be individually selected to run at 9V or 12V.

9V (x2) – High Current 9V and Line 6 Modelers
These two outputs each deliver 250mA allowing you to run high current draw effects like the Boss DD-20 Giga Delay or Line 6 DL4 Delay Modeler. Via switches underneath the Pedal Power 2 Plus, these two outputs can be separately configured for regulated (Boss Twin Pedals) or unregulated (Line 6 Modelers) power allowing you to run both units if so desired. These outputs can also power any standard 9V effects as well.

9V (x2) – Standard 9V with Battery Sag Control
These outputs each have an available 100mA of power, but also allow you to SAG the voltage from roughly 4V to 9V. This feature can be enabled via the bottom panel switches. The SAG control is mostly useful for transistor-based fuzz, octavia, and distortion circuits, as most modern opamp designs are minimally affected by variations in supply voltage. We recommend turning SAG off if you're going to run digital pedals like delay, chorus, and reverb.

18V/24V – Using Custom Cables
All of the outputs on the Pedal Power 2 Plus (and the original Pedal Power) are completely isolated allowing you to create different voltages. You can run effects like the current MXR Flanger by combining two 9V outputs to create a single 18V supply. By switching two outputs into 12V ACA mode, you can join them together to create a 24V output for powering numerous Electro-Harmonix pedals including the Deluxe Memory Man.

Pedal Power 2 Plus does it all, and does it well, because any less will degrade your pedals performance. Players everywhere upgrade to Pedal Power 2 Plus because it powers what conventional power supplies can't. The Pedal Power 2 Plus uses a custom designed, ultra-low noise toroidal transformer, with separate balanced windings for every output. Now even the most sensitive pedals can be dead quiet

Pedal Power 2 Plus is hand made in the U.S.A., comes complete with cables, detachable AC power cord, a 5-year warranty, and simply makes you sound better.



Facebook Twitter Follow us on Instagram