Fender Cryo full Revalve Kits / Fender Hot Rod Deluxe Harma STR GT- 6L6 GC GE-Cryo Full Revalve Kit

Fender Hot Rod Deluxe Harma STR GT- 6L6 GC GE-CRYO Full revalve kit     Click on image(s) above to view larger
£126.00
£100.80

BACK
All prices contained on this page are exclusive of VAT. This is currently charged at 20% and is payable by all EU countries.

Fender Amplifiers have a huge musical legacy that dates from the very beginning of modern popular music. Fender amplifies have a clean tonal character which is not matched by another manufacture in the world. Our Fender full revalve kits are put together after a life time of using and comparing the performance of valves in these amplifiers. The kits offer the best options drawn from original new old stock USA made valves and their modern counterparts. They are designed and put together to provide improved sonic and tonal definition with more clarity out of these legendary amplifiers. Each preamp kit is specially selected for low noise, uniform gain and tonal characteristic. All output valves have been burst tested and matched on anode current and gain. Our Cryo treated valves sets have quite rightly caused a major buzz in the music industry since their launch. By upgrading the valves to selected cryogenically treated valve sets customers have noticed the additional benefits such as better clarity, larger and improved sound stage with increased definition under distortion. These kits offer the best sonic upgrade to your Fender amplifier.
The Fender Hot Rod Deluxe Harma STR GT- 6L6 GC GE CRYO Full revalve kit is designed to give your Hot Rod Deluxe amplifier the best balance of clean headroom and smooth warm overdrive.

This Cryo valve set gives improvements in the clarity and definition of the distortion by removing the mush comes with the standard set. It also gives better harmonics and creamier distortion from the output section.

The Harma ECC83 –STR Cryo is used in our Fender kits as is the best choice for the sparkling clean sounds that most players want from their Fender amplifiers. The mid-range is very transparent which when changing pickup selection give a nice tonal variation which is lost in some other valves.
The valve responds very well to pedals and crunches up without that harsh Fuzzy tone.

The Harma ECC83 STR construction is based on the famous frame grid design that was pioneered in Germany by Telefunken. The advantages of this design are reduced microphonics and better isolation from vibration, which is very important in combo applications such as Fenders.

We use a specially gain selected cryo valve in all positions to ensure sparkling Fender clean sounds. V1 & V2 are the most critical positions in this amplifier as the amplifiers design is a basic one channel kicking in a 2nd gain stage when the drive is selected.
This is where the Cryo treated version removes the mushy tonality of the standard factory set. Top end is also enhanced as it is more sparkling and clearer when compared to the untreated item. A balanced phase inverter valve ensures even drive to the output valves.

The Groove Tubes 6L6GC-G.E Cryo Re issue is a faithful recreation of General Electric later type clear top 6L6GC. This is one of the most famous 6L6GC of all time due to incredible dynamic range and large sound stage.

We have chosen this valve as the Cryo treated version offers huge improvements in performance over the standard untreated item.

In clean mode, this valve rivals the original U.S.A made G.E as it provides a warm smooth sound with a very clean and open treble and is a faithful reproduction of the originals tone. In overdriven mode the valve displays the right balance in terms of top end clarity and crunchy dynamics producing a clear creamy warm sustain. The Cryo treaded version offers more upper end definition and harmonics. The warm rounded distortion of the Cryo valve makes this one of the best choices in Fender amplifiers.

The Cryo 6L6GC-G.E reissues are our Super Premium valves which have been specially burst tested by us. We take selected GT items and in addition to GTs in house testing and distortion rating they then also undergo our own unique real world burst testing. The burst testing process involves a series of varying timed electrical signal bursts. This runs the valves under the same stress conditions that they will meet in your amplifier. All out put valves are then dual matched by us on current and gain. This will ensure that you get the best selected GT valves available anywhere in the world.

The kit consists of 5 valves

2 Specially Selected Harma ECC83 STR-Cryo for positions V1 & V2.
1 Balanced Harma ECC83 STR Cryo for V3.
2 Groove Tube 6L6GC-GE Re issue Cryo Super Premium in matched pair.

Comments



NEWSLETTER SIGN UP

FOLLOW US
Facebook Twitter Follow us on Instagram